Deleting Part Of A Scene (Avchd) - Panasonic HC-X900M Owner's Manual

(When [SINGLE] is selected in Step 2)
Touch the scene/still picture to be deleted.
≥ Touched scene or still picture is deleted.
4
(When [MULTI] is selected in Step 2)
Touch [Delete].
≥ To continuously delete other scenes/still pictures, repeat Steps 3-4.
When you stop deleting halfway
Touch [CANCEL] while deleting.
≥ The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editing
Touch [Return].
≥ You can also delete scenes by touching
MULTI
[ALL SCENES], [
≥ You can also delete still pictures by touching
[DELETE] # [ALL SCENES], [
≥ During Highlight Playback or Disc Playback when connected to a DVD burner (optional),
scenes/still pictures cannot be deleted.
≥ Scenes that cannot be played back (the thumbnails are displayed as
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture
(other than JPEG) that cannot be played back on this unit, may be erased.

Deleting part of a scene (AVCHD)

Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥ Change the mode to
AVCHD scene. (l 39)
1
Select the menu.
: [EDIT SCENE] # [SECTION DELETE
MENU
2
Touch the scene with a part to delete.
3
Slide while touching the two top and bottom
section selection buttons
section to delete
≥ It is convenient to use Slow-motion Playback and Frame-
by-frame Playback. (l 91)
4
Touch [ENTER].
MENU
SINGLE
] or [ ].
MULTI SINGLE
] or [
and touch the play mode select icon. Then, select the
]
and set the
, selecting [EDIT SCENE] # [DELETE] #
, selecting [PICT. SETUP] #
MENU
].
) cannot be deleted.
0h00m15s 0h00m15s 0h00m15s
103
VQT4C76