Fade *1; Pre-Rec - Panasonic HC-X900M Owner's Manual

Fade
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥ The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
: [RECORD SETUP] # [FADE COLOR] #
MENU
[WHITE] or [BLACK]
≥ The thumbnails of scenes recorded using fade in become black (or white).
Intelligent Contrast Control
This brightens parts that are in shadow and difficult to see and suppresses white
saturation in bright parts at the same time. Both bright and dark parts can be recorded
clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not
be clear.

PRE-REC

This prevents you from missing a shot.
This allows recording of the pictures and sound to start approximately 3 seconds
before the recording start/stop button is pressed.
≥
PRE-REC
appears on the screen.
≥ Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
j If you change the mode
j
HC-X900M
If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD]
j
HC-X800
If you remove the SD card
j If you touch
MENU
j If you press 1080/60p button
j If you turn the unit off
j If you start recording
j After 3 hours have passed
Q.
or
MENU
(Fade in)
(Fade out)
VQT4C76
61