Optical Image Stabilizer Lock
In Motion Picture Recording Mode, you can further improve optical image stabilization
by touching and holding
the shake that tends to occur when using zoom.
1
Press the Optical Image Stabilizer button to turn the image stabilizer on.
2
Touch and hold
≥ Icon is displayed in A while you are touching and holding
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of
Display of
will not disappear even when no operation is performed for specific time with
the default setting. To make the display of
[O.I.S. LOCK DISPLAY].
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
MENU
[ON]:
Constantly display.
[OFF]:
The icon will disappear after approx. 5 seconds without any touch operation.
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release Optical Image Stabilizer Lock.
Touch Shutter
It is possible to focus and record a still picture of a subject that is touched.
1
Touch
.
2
Touch the subject.
≥ Focus area will display on the touched position, and a
still picture is recorded.
≥ Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
≥ This will not operate for recording yourself.
. With this function, you can further reduce the effects of
.
disappear
disappear, change the setting of the
.
VQT4C76
59