Deleting Part Of A Scene (Avchd/Backup For Twin Camera) - Panasonic HC-WXF1 Operating Instructions Manual

Deleting part of a scene
(AVCHD/Backup for Twin Camera)
Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be
deleted.
The deleted scenes cannot be restored.
≥ Touch [AVCHD] in the motion picture/still picture tab
1
Select the menu.
: [EDIT SCENE] # [SECTION DELETE]
MENU
2
Touch the scene with a part to delete.
3
Set the section to delete by touching and sliding
the top and bottom section selection buttons
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l
4
Touch [ENTER].
5
Confirm (play back) the scene after editing by touching [YES].
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [ENTER].
≥ Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
≥ Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part of a scene is deleted.
WXF1M
≥ (For the )
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining.
120)
(l 38)
(l 158)
- 151 -
0h00m15s 0h00m15s 0h00m15s
.