Table of Contents
Advertisement
Touch [SET] to set.
Touch [SET].
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
Note
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
•
The clock is displayed when [
•
You can set the year from 2000 to 2099.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP]
•
Be sure to set the correct date and time, otherwise the date stamp will be incorrect when the
picture is printed.
Preparation
] is touched several times during recording.
(P153)
or order a photo studio to print the pictures.
- 29 -
Advertisement
Table of Contents
