Table of Contents
Advertisement
Taking pictures using White Balance Bracket is not possible.
•
Is there any memory remaining on the card?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Increase the setting for [NOISE REDUCTION] in [PICTURE ADJUST] or lower the setting
for each of the items other than [NOISE REDUCTION].
> Take pictures in bright places.
> Set the [LONG SHTR NR] to [ON].
•
Is the [PICTURE SIZE]
•
Is the [DIGITAL ZOOM] set?
Under fluorescent lighting, flicker or horizontal bars may be seen.
•
This is characteristic of MOS sensors which serve as the camera's pickup
sensors.
This is not a malfunction.
•
When you see noticeable flicker or striping while recording a motion picture,
you can reduce the flicker or striping by setting up [FLICKER RED.]
and fixing the shutter speed. It is possible to select a shutter speed from [1/50],
[1/60], [1/100], or [1/120].
Others
(P98)
(P136)
(P130)
or the [QUALITY]
(P69)
- 208 -
(P137)
(P131)
set low?
(P141)
Advertisement
Table of Contents
