Table of Contents
Advertisement
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
•
Is the subject focused?
> [FOCUS PRIORITY] is set to [ON] at the time of purchase, and so you cannot take pictures
until the subject is in focus. If you want to be able to take a picture when you press the
shutter button fully even if the subject is not focused, set [FOCUS PRIORITY] in the
[CUSTOM] menu to [OFF].
•
You may not be able to record for a short while after turning the power [ON] when using a large
capacity card.
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with finger print or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft dry
cloth.
> Refer to
P197
when the image sensor gets dirty.
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Is the AE Lock
(P105)
Multiple pictures are taken at one time.
> Unset the settings of White Balance Bracket (P97).
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
•
Is [FOCUS PRIORITY] in the [CUSTOM] menu set to [OFF]?
In this case, the picture may not be properly focused even if [AFS] or [AFC] in [FOCUS MODE]
is set.
•
Is the AF Lock
(P105)
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
•
The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures.
> We recommend using a tripod and the self-timer
shutter speed.
•
Are you using a lens which supports the Stabilizer function?
Recording
(P144)
applied incorrectly?
applied incorrectly?
- 207 -
Others
(P78)
(P33)
(P77)
(P144)
(P83)
when taking pictures with a slow
(P76)
(P35)
Advertisement
Table of Contents
