Table of Contents
Advertisement
Note
•
It will be a normal motion picture recording when recording a motion picture.
•
Aperture or shutter speed can be set by touching [F] (aperture) or [SS] (shutter speed) and then
touching the exposure meter bar in the Quick Menu (P58).
•
The brightness of the LCD monitor and the recorded pictures may differ. Check the pictures on
the playback screen.
•
If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
•
In Manual Exposure Mode [‡], [
•
The [SENSITIVITY] is automatically set to [ISO100] when you switch the Recording Mode to
Manual exposure while the [SENSITIVITY] is set to [AUTO] or [
•
If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
•
When you use a lens with an aperture ring, the aperture ring setting takes priority.
Recording
], [
] and [
] are disabled.
- 103 -
] (Intelligent).
Advertisement
Table of Contents
