Configuration - NEC DLP Cinema NC3200S User Manual

4. Using Menus

4-4. Configuration

Please request your dealer/distributor to perform the settings.
4-4-1. Lamp Setup
Adjust
Adjusts the lamp output (brightness). Control the output at 10 W increments.
Feedback
Sets the lamp brightness constant mode that uses a brightness sensor.
Disable
Enable
4-4-2. Lens Control
Adjust the position, size, and focus of the projected screen.
Press the ENTER button to switch the display between "Lens Position" and "Focus Zoom" adjustments. Press the EXIT button
to return to a menu one level above.
Lens Position
Adjusts the position of the projected screen.
The projected screen moves in the selected direction as you press the UP/DOWN/LEFT/RIGHT button.
Focus Zoom
Fine tunes the size (Zoom) and focus (Focus) of the projected screen.
Press the UP/DOWN button to adjust the focus.
Press the LEFT/RIGHT button to adjust the size of the projected screen.
38
← Displays the lamp output (%) with regard to the setting.
← Adjusts the lamp brightness.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Disables the lamp brightness constant mode.
Enables the lamp brightness constant mode.