NEC DLP Cinema NC3200S User Manual page 49

6
Mount the air inlet cover.
Align the catches on the bottom of the air inlet cover with the protrusions on the projector, and push in until the latch
clicks to mount the air inlet cover.
This completes replacement of the air filters for the projector air inlet on the front.
5-3-3. Replacing air filters for the projector air inlets on the side
Prepare the optional NC-80AF02 to replace air filters for the projector air inlets on the side. The NC-80AF02 contains four
replacement air filters. Two air filters (one each for two air inlets) are required for the projector air inlets on the side.
1
Turn off the power to the projector.
2
Remove the filter cover.
Push the latch until it clicks to unlock the filter cover.
Latch
5. Maintenance of Your Projector
Latch
9