NEC DLP Cinema NC3200S User Manual page 16

1. What's in the Box? and the Names of the Projector Parts
7. POWER button
Press this button for more than three seconds to turn on or off (standby) the projector.
In order to start up the projector, turn on the main power switch for the lamp and then the main power switch for the projector
to set the projector in the standby state. (See page 21)
Lit green
Blinking green
Lit white
Blinking white
8. DOUSER button
Press this button to open and close the douser.
9. LAMP ON/OFF button
Press this button for five seconds or longer to turn on or off the lamp while the projector is on. (See page 29)
10. IMB button
This button is operable when the media block is installed in the projector.
Press this button to display the operation menu of the media block.
11. Play/pause button
This button is operable when the media block is installed in the projector.
Press this button to play or pause the image contents.
12. Stop button
This button is operable when the media block is installed in the projector.
Press this button to stop playing the image contents.
13. /// (UP/DOWN/LEFT/RIGHT) buttons
Press these buttons to select a menu item while a menu is displayed.
14. EXIT button
Press this button to return to the previous menu item.
16
Power is on
The projector is starting up.
Power is off (in the standby state)
The cooling fan(s) is running immediately after a power-off.