Garmin aera 560 Pilot's Manual page 180

Appendix D
GENERAL INTERFACE SETUP
The Interface Setup controls the input/output format used when connecting the unit
to external devices.
Selecting an interface:
1) From the 'Home' Screen, touch Tools > Setup > Interface.
2) Touch Serial Data Format. A vertical list is displayed.
3) Touch the desired data format ('Garmin Data Transfer', 'NMEA Out',
'Aviation In', 'Aviation In/NMEA & VHF Out', 'GTX TIS-A In', 'GTX
TIS-A In/NMEA & VHF Out', or 'None'.
4) If desired, touch Menu > Description.
Restoring interface defaults:
From the 'Home' Screen, touch Tools > Setup > Interface > Menu >
Restore Default.
S D
erIAl AtA
• None—provides no interfacing capabilities.
• NMEA Out—transmits NMEA position, velocity, and navigation data.
• Aviation In—the proprietary format used for connection to a Garmin panel-
mounted GPS receiver. This eliminates the need to enter the destination on both
units.
• Aviation In/NMEA & VHF Out—receives aviation data and transmits out both
NMEA data, at 9600 baud, and VHF frequency tuning information to a Garmin
Nav/Comm radio.
• GTX TIS-A In—receives TIS-A data from a Garmin Mode S transponder or other
compatible device.
• GTX TIS-A In/NMEA & VHF Out—receives TIS data and transmits out both NMEA
data, at 9600 baud, and VHF frequency tuning information to a Garmin Nav/
Comm radio.
• Garmin Data Transfer—the proprietary format used to exchange data with a PC,
GDL 39, or another Garmin aera.
164
F
orMAtS
Garmin aera 500 Series Pilot's Guide 190-01117-02 Rev. C