Connecting Power To The Mount - Garmin Montana 650t Instructions Manual

Amps rugged mount
Hide thumbs Also See for Montana 650t:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Connecting Power to the Mount

If any wire is left unconnected, insulate the wire and safely secure it on your
vehicle.
1. Select a location to mount the Montana on your vehicle, based on available
power sources, safe cable routing, and that the driver view is not obstructed.
2. Connect the red
Volts).
3. If necessary, connect the serial data wires to your vehicle.
• Yellow
• Blue
is the serial data output wire.
• Green
4. If necessary, connect the audio jack
AMPS Rugged Mount Instructions
and black
is the serial data input wire.
is the serial ground wire.
notice
wires to your vehicle's main power (10 to 50
.
EN-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Montana 650Montana 600Montana 600 series

Table of Contents