Epson WorkForce Pro WP-4590 User Manual page 330

sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the
number of devices that you may connect to your line, you may want to contact your local telephone
company to determine the maximum REN for your calling area. For products approved after July 23,
2001, the REN for this product is part of the product identifier that has the format US: BKMFA01BC451E.
The digits represented by 01B are the REN without a decimal point (e.g., 01B is a REN of 0.1B). For
earlier products, the REN is separately shown on the label.
This equipment may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs.
Should this equipment cause harm to the telephone network, the telephone company may discontinue
your service temporarily. If possible they will notify you in advance that temporary discontinuance of
service may be required. But if advanced notice isn't practical, the telephone company will notify you as
soon as possible. You will be informed of your right to file a complaint with the FCC. The telephone
company may make changes in its facilities, equipment, operations or procedures that could affect the
proper functioning of your equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
This product is not intended to be repaired. If you experience trouble with this equipment, please contact:
Name: Epson America, Inc.
Address: 3840 Kilroy Airport Way, Long Beach, CA 90806 U.S.A.
Telephone: (562) 981-3840
The telephone company may ask that you disconnect this equipment from the network until the problem
has been corrected or until you are sure that the equipment is not malfunctioning.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
other electronic device, including fax machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine or such business,
other entity, or individual. In order to program this information into your fax machine, follow the
instructions for entering fax header information.
According to the FCC's electrical safety advisory, we recommend that you may install an AC surge
arrestor in the AC outlet to which this equipment is connected. Telephone companies report that
electrical surges, typically lightning transients, are very destructive to customer terminal equipment
connected to AC power sources and that this is a major nationwide problem.
330