Configuring The Machine For Administrator Mode; System Page - Epson AcuLaser CX16 Reference Manual

Configuring the Machine for Administrator Mode

The Configuration page allows you to view and change the configuration settings of the machine.

System Page

This page allows you to configure several user and specific machine items.
Device Information
Summary (shown above)
The System - Device Information - Summary window provides the following information.
Item
Device Name
Device Place
Engine Serial Number
Memory
Input Tray
Network
Logout button
Note:
All of the information displayed on the System Page - Device Information - Summary is read-only;
however, some of the items (such as the device name) are configurable on other pages.
Input Tray
The System - Device Information - Input Tray window provides the following information.
Description
Displays the name of the machine.
Displays the setup location for the machine.
Displays the serial number of the machine engine.
Displays the amount of memory installed in the machine.
Identifies the input trays installed on the machine.
Note:
If the optional lower feeder unit has been installed, "Tray 2" is indicated.
Lists the machine interface (Ethernet 10Base-T/100Base-TX).
Logs out from Administrator Mode and returns to User Mode.
Note:
This button is available from all web pages.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 64