Messages Regarding Printheads; Clean X P Head (X Is Left Or Right) - Canon imagePROGRAF iPF6000S User Manual

Messages regarding printheads

Messages regarding printheads
Cannot adjust printhead.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment.
Paper is loaded that cannot be used for Standard
Adj. in Auto Band Adj..

Clean x P Head (x is Left or Right)

The Printhead nozzles are clogged.
698 Error Message
Cause
Cause
Cause
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.624)
2.
Clean the Printhead if the nozzles are clogged.
(→P.625)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.571)
Corrective Action
Follow these steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.624)
2.
Clean the Printhead if the nozzles are clogged.
(→P.625)
Adjust the feed amount manually.
(→P.580)
Execute Auto Band Adj. > Advanced Adj..
(→P.578)
Corrective Action
Specify Printhead cleaning options.
(→P.625)
If the message is still displayed after you execute
Head Cleaning B one or two times, contact your
Canon dealer for assistance.