Printing On Non-Standard Paper Sizes (Mac Os X) - Canon imagePROGRAF iPF6000S User Manual

Printing banners or at other non-standard sizes

Printing on Non-Standard Paper Sizes (Mac OS X)

This topic describes how to print after registering "Custom Media Size" based on the following example. Here, you
will register a non-standard paper size named "430*430" in "Custom Media Size".
•
Document: Scanned image
•
Page size: A square sheet (430×430 mm [16.9×16.9 in])
•
Paper: Sheets ( Manual )
•
Paper type: Plain Paper
•
Paper size: A square sheet (430×430 mm [16.9×16.9 in])
Note
•
The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
1.
Create the document in the application.
2.
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
3.
Choose Page Setup from the application menu to display the Page Attributes dialog box.
4.
Select the printer in the
5.
Click Manage Custom Sizes in the
dialog box.
6.
In Page Size, enter the height and width of the original. Here, enter "43.00 cm" in Height and
Width.
7.
In Printer Margins, enter "0.3" for the top and side margins and "2.3" for the bottom margin.
Here, measurements are entered in centimeters.
8.
Double-click Untitled in the list at left in the Custom Page Sizes dialog box and enter the
paper name-in this case, "430*430".
9.
Click OK to close the Custom Page Sizes dialog box.
10.
C
In the Paper Size list, click the size of the original. In this case, click "430*430", the size
you registered.
11.
F
Click OK to close the dialog box.
12.
Choose Print in the application menu.
300 Enhanced Printing Options
B
Format for list.
C
Paper Size list to display the Custom Page Sizes