Paper Size Not Detected - Canon imagePROGRAF iPF6000S User Manual

Messages regarding paper
RollWdthMismatch
The paper size as specied on the
printer does not match the size
specied in the printer driver.

Paper size not detected.

Paper has been loaded askew, or warped paper has
been loaded.
686 Error Message
Cause
If you have selected Fit Roll Paper
Width in the printer driver settings
and Warning in Detect Mismatch
in the printer menu:
If you have selected Fit Roll Paper
Width in the printer driver settings
and Pause in Detect Mismatch in
the printer menu:
Cause
Printing resumes after the warning
message is displayed. However,
note that this error may cause
paper jams and affect the printing
quality. Try printing again after
adjusting the paper size as
specied in the printer driver and
the size specied on the printer so
that they match.
Follow the steps below to ensure
the paper size matches on the
printer and in the printer driver.
1.
Hold down the Stop button for
a second or more to cancel
printing.
2.
Make sure the roll width
selected in the dialog box
displayed when you select Fit
Roll Paper Width in the printer
driver matches the width of the
roll loaded in the printer, and
then try printing again.
Press the Online button to resume
printing.
However, note that this error may
cause paper jams and affect the
printing quality.
Corrective Action
1.
Reload paper straight, in the correct position.
(→P.118)
(→P.148)
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Corrective Action