Top Cover Is Open; Prepare For Parts Replacement; Parts Replacement Time Has Passed; Multi-Sensor Error - Canon imagePROGRAF iPF605 User Manual

Other Messages

Top cover is open.

The printer has detected that the Top Cover is open.

Prepare for parts replacement.

It is almost time to replace consumables for which
service is required.

Parts replacement time has passed.

It is past the recommended time to replace
consumables for which service is required.
Unknown le.
Invalid data format.

Multi-sensor error

Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
The performance of a sensor inside the printer may
be impaired.
Roll feed unit err
The Roll Feed Unit is not working.
No Roll Feed Unit.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
554 Error Message
Cause
Cause
Cause
Cause
Cause
Cause
Cause
Corrective Action
Open the Top Cover fully, remove any foreign objects,
and close the Top Cover again.
If the error occurs again, turn off the printer and wait
a while before restoring power.
Corrective Action
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
Check the print job and resend it.
Corrective Action
Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
Contact your Canon dealer for assistance.
Corrective Action
Turn off the printer, remove the Roll Feed Unit
momentarily, and then reinstall it.
(→P.139)
(→P.140)
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
Corrective Action
Install the Roll Feed Unit and resend the print job.
(→P.140)