Problems with the printing quality
The surface of the paper is dirty
The Paper Retainer is soiled.
You are using a paper that does not dry easily.
The back side of the paper is dirty
The Platen has become dirty after borderless printing
or printing on small paper.
The Paper Retainer is soiled.
Roller marks are left across the trailing edge of paper
A document was removed after printing from
the Front Paper Feed Slot without pressing the
Load/Eject button.
520 Troubleshooting
Cause
Cause
Cause
Corrective Action
Clean the Paper Retainer.
(→P.498)
Specify a time of about a minute in Roll DryingTime.
Corrective Action
Open the Top Cover and clean the Platen.
(→P.495)
Clean the Paper Retainer.
(→P.498)
Corrective Action
Following the instructions, press the Load/Eject
button, remove the paper, and then press the OK
button.
Wipe away any soiling on the rollers.
(→P.495)
(→P.498)