Cannot Print Over A Netware Network; Cannot Print Over Appletalk Or Bonjour Networks - Canon imagePROGRAF iPF605 User Manual

Cannot print over a NetWare network

The printer's NetWare settings are not congured
correctly.
The computer you are trying to print from is not
congured correctly.
The NetWare server and services are not congured
correctly.
The printer was turned off and on when not
disconnected from the server.

Cannot print over AppleTalk or Bonjour networks

The AppleTalk protocol is not enabled on the printer.
The computer you are trying to print from is not
congured correctly.
The computer and printer are not on the same
network.
Cause
Cause
Corrective Action
Make sure the printer's NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected. For details, see "Conguring
the Printer's NetWare Network Settings". (→P.425)
Make sure the computer's NetWare settings are
congured correctly. For details, see "Conguring
NetWare Network Settings". (→P.443)
Check the following points.
1.
Make sure the NetWare le server is running.
2.
Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify
"Other/Unknown" as the printer type.
Leave the printer off for at least 30 seconds, and
then restore power.
Corrective Action
Activate AppleTalk on the printer.
(→P.424)
Make sure the computer's AppleTalk settings are
congured correctly.
(→P.447)
(→P.452)
Due to the nature of Bonjour, you cannot print if
the printer is on another network behind a router.
Make sure the computer and printer are on the same
network. For information about network settings, ask
your network administrator.
Cannot print over a network
Troubleshooting 527