3.5.3
South Bridge Configuration
UEFI BIOS Utility - Advanced Mode
Main
Back
Advanced\
HPET
HPET [Enabled]
Allows you to set the HPET timer.
Configuration options: [Disabled] [Enabled]
3.5.4
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA
Port items show Not Present if no SATA device is installed to the corresponding SATA port.
UEFI BIOS Utility - Advanced Mode
Main
Back
Advanced\
SATA Configuration
SATA6G_1
SATA6G_2
SATA6G_3
SATA6G_4
SATA6G_5
eSATA
> SB SATA Configuration
SB SATA Configuration
Options for SATA Configuration.
OnChip SATA Channel [Enabled]
[Enabled]
[Disabled]
The following items appear only when you set the OnChip SATA Channel item to
[Enabled].
3-20
Ai Tweaker
Advanced
South Bridge >
Ai Tweaker
Advanced
SATA Configuration >
Enables the onboard channel SATA port.
Disables the onboard channel SATA port.
Monitor
Boot
Disabled
HPET Timer
Monitor
Boot
Options for SATA Configuration.
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Chapter 3: BIOS setup
Exit
Tool
Exit
Tool