North Bridge Configuration - Asus M5A99X EVO R2.0 User Manual

HPC Mode [Disabled]
Allows you to enable or disable High Performance Computing (HPC) function.
Configuration options: [Enabled] [Disabled]
APM Master Mode [Auto]
Allows you to enable or disable Application Power Management (APM) function.
Configuration options: [Auto] [Enabled] [Disabled]
3.5.2

North Bridge Configuration

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
North Bridge Configuration
IOMMU
> Memory Configuration
Initiate Graphic Adapter
Starting Address: 0 KB
Ending Address: 2080768 KB
Dimm0: Not Present
Dimm1: size=2048 MB, speed=1066 MHz
Dimm2: Not Present
Dimm3: Not Present
IOMMU [Disabled]
Set IOMMU to Enabled to show IOMMU Mode.
Configuration options: [Disabled] [Enabled]
IOMMU Mode [Disabled]
This item appears only when you set IOMMU item to [Enabled]. IOMMU is supported
on LINUX based systems to convert 32bit I/O to 64bit MMIO.
Configuration options: [Disabled] [64MB]
3-18
Ai Tweaker
Advanced
North Bridge >
Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.
Monitor Boot
Enabled/Disabled IOMMU
Disabled
PEG/PCI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chapter 3: BIOS setup
Exit
Tool