Using Quick Connection
Configuring the PPPoE connection settings
Before enabling the Network iControl's Quick Connection functions, you must configure the
PPPoE connection settings
To configure the PPPoE settings:
1.
Right-click
Right-click the PPPoE Connection, and select Properties.
2.
3.
Click the Options tab, and deselect Prompt for name and password, certificate,
etc. Click OK to complete the auto PPPoE connection settings.
•
•
4-26
in the taskbar, and select Open Network and Sharing Center.
You only need to configure the PPPoE connection settings once.
Obtain the necessary information about your PPPoE connection from your network
provider.
Chapter 4: Software support