Apm - Asus M5A97 LE R2.0 User Manual

Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC'97
or high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
3.5.8

APM

ErP Ready [Disabled]
[Disabled]
[Enabled]
The following items appear only when you set the ErP Ready to [Disabled].
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PS/2 Device [Disabled]
[Disabled]
[Enabled]
Power On By PME [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3-20
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Disables the Energy Related Products (ErP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PS/2 devices from generating a wake event.
Enables the PS/2 devices to generate a wake event.
Disables the PME devices from generating a wake event.
Enables the PME devices to generate a wake event.
Disables Ring to generate a wake event.
Enables Ring to generate a wake event.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/
Second will become user-configurable with set values.
Chapter 3: BIOS setup