Asus M5A78L-M USB3 User Manual

Asus M5A78L-M USB3 User Manual

Amd 760g(780l)/sb710 chipset
Table of Contents

Advertisement

M5A78L-M/USB3

Advertisement

Table of Contents
loading

Summary of Contents for Asus M5A78L-M USB3

  • Page 1 M5A78L-M/USB3...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
  • Page 3: Table Of Contents

    Welcome! ..................1-1 Package contents ................. 1-1 Special features ................1-1 1.3.1 Product highlights ............1-1 1.3.2 Innovative ASUS features ..........1-3 Before you proceed ..............1-5 Motherboard overview ..............1-6 1.5.1 Placement direction ............1-6 1.5.2 Screw holes ..............1-6 1.5.3...
  • Page 4 Chapter 2: BIOS information Managing and updating your BIOS ..........2-1 2.1.1 ASUS Update ..............2-1 2.1.2 ASUS EZ Flash 2 ............2-2 2.1.3 ASUS CrashFree BIOS 3 ..........2-3 BIOS setup program ..............2-4 2.2.1 BIOS menu screen ............2-5 2.2.2...
  • Page 5 Boot menu .................. 2-19 2.6.1 Boot Device Priority ............2-19 2.6.2 Boot Settings Configuration .......... 2-19 2.6.3 Security ................. 2-20 Tools menu ................. 2-22 2.7.1 ASUS EZ Flash 2 ............2-22 2.7.2 ASUS O.C. Profile ............2-22 Exit menu ..................2-23...
  • Page 6: Notices

    This class B digital apparatus complies with Canadian ICES-003. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 7: Safety Information

    Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
  • Page 8: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.
  • Page 9: M5A78L-M/Usb3 Specifications Summar

    ** Due to CPU spec., AMD 100 and 200 series CPUs support ® up to DDR3 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz. *** When overclocking, some AMD CPU models may not support DDR3 1600 MHz or higher frequency DIMMs.
  • Page 10 ASUS Anti-Surge protection ASUS Q-Fan ASUS AI Charger ASUS CrashFree BIOS 3 ASUS EZ Flash 2 ASUS MyLogo 2 ASUS C.P.R. (CPU Parameter Recall) Back panel I/O 1 x PS/2 Keyboard/Mouse combo port ports 1 x HDMI port 1 x D-Sub port...
  • Page 11: Chapter 1: Product Introduction

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
  • Page 12 Cool ‘n’ Quiet Technology ® This motherboard supports the AMD Cool ‘n’ Quiet technology which ® monitors system operation and automatically adjusts CPU voltage and frequency for a cool and quiet operating environment. HyperTransport™ 3.0 support HyperTransport™ 3.0 technology provides 2.6 times more bandwidth than HT1.0 that radically improves system efficiency for a smoother and faster computing environment.
  • Page 13: Innovative Asus Features

    BIOS file using the bundled support DVD or a USB flash disk that contains the BIOS file. ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS from a USB flash disk before entering the OS. ASUS Q-Fan...
  • Page 14 ErP requires products to meet certain energy efficiency requirements in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energy-efficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts.
  • Page 15: Before You Proceed

    ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR M5A78L-M/USB3 Standby Power Powered Off M5A78L-M/USB3 Onboard LED ASUS M5A78L-M/USB3...
  • Page 16: Motherboard Overview

    Motherboard overview 1.5.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 1.5.2 Screw holes Place eight screws into the holes indicated by circles to secure the motherboard to the...
  • Page 17: Motherboard Layout

    USB connectors (10-1 pin USB78, USB910, 1-26 USB1112) Serial port connectors (10-1 pin COM1) 1-27 Digital audio connector (4-1 pin SPDIF_OUT) 1-26 LPT connector (26-1 pin LPT ) 1-22 Front panel audio connector (10-1 pin AAFP) 1-22 Serial ATA connectors (7-pin SATA3G_1~6) 1-24 ASUS M5A78L-M/USB3...
  • Page 18: Central Processing Unit (Cpu)

    Right Central Processing Unit (CPU) This motherboard comes with an AM3+ socket designed for FX™ / Phenom™ II / Athlon™ II / Sempron™ 100 series processors. The AM3+ socket has a different pinout from the AM2+/AM2 socket. Ensure that you use a CPU designed for the AM3+ socket.
  • Page 19 Connect the CPU fan cable to the CPU_FAN connector on the motherboard. CPU_FAN M5A78L-M/USB3 M5A78L-M/USB3 CPU fan connector DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. ASUS M5A78L-M/USB3...
  • Page 20: Installing The Heatsink And Fan

    1.6.2 Installing the heatsink and fan Ensure that you use only AMD-certified heatsink and fan assembly. To install the CPU heatsink and fan: Place the heatsink on top of the installed CPU, ensuring that the heatsink fits properly on the retention module base. •...
  • Page 21: System Memory

    DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption. The figure illustrates the location of the DDR3 DIMM sockets: Channel Sockets Channel A DIMM_A1 and DIMM_A2 Channel B DIMM_B1 and DIMM_B2 M5A78L-M/USB3 M5A78L-M/USB3 240-pin DDR3 DIMM sockets ASUS M5A78L-M/USB3 1-11...
  • Page 22: Memory Configurations

    • Due to the CPU specification, AMD 100 and 200 series CPUs support up to DDR3 ® 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz. • When overclocking, some AMD CPUs may not support DDR3 1600MHz or higher frequency DIMMs.
  • Page 23 • • Super WA160UX6G9 6GB(3 x 2GB) DS - • Talent Elixir M2Y2G64CB8HA9N-DG(XMP) DS - • • Mushkin 998659(XMP) 6GB(3 x 2GB) DS - 9-9-9-24 • PATRIOT PGS34G1600LLKA 4GB(2 x 2GB) DS - 7-7-7-20 1.7V • • ASUS M5A78L-M/USB3 1-13...
  • Page 24 DDR3-1333MHz capability DIMM socket Chip support (Optional) Vendors Part No. Size Chip NO. Timing Voltage Brand AD30908C8D-151C A-Data AD31333001GOU A-Data • • • E0906 A-Data AD31333G001GOU 3GB(3 x 1GB) SS 8-8-8-24 1.65-1.85V • • • AD30908C8D-151C A-Data AD31333002GOU DS A-Data •...
  • Page 25 8-8-8-24 1.5V • • • TAKEMS TMS2GB364D082-138EW DS - 8-8-8-24 1.5V • • • UMAX E41302GP0-73BDB DS UMAX U2S24D30TP-13 • • V-Color TD2G16C9-Z8 DS HYNIX H5TQ1G83AFP • • • WINTEC 3WVS31333-2G-CNR DS AMPO AM3420803-13H • • • ASUS M5A78L-M/USB3 1-15...
  • Page 26 • Due to CPU spec., AMD 100 and 200 series CPUs support up to DDR3 1066MHz. With ® ASUS design, this motherboard can support up to DDR3 1333MHz. • When overclocking, some AMD CPU models may not support DDR3 1600 MHz or higher frequency DIMMs.
  • Page 27: Installing A Dimm

    DIMM. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. DIMM notch Remove the DIMM from the socket. ASUS M5A78L-M/USB3 1-17...
  • Page 28: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
  • Page 29: Jumpers

    • You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the CPU Parameter Recall (C.P.R) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. ASUS M5A78L-M/USB3 1-19...
  • Page 30: Connectors

    1.10 Connectors 1.10.1 Rear panel ports 5 6 7 8 PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard/mouse. Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.
  • Page 31 HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray and other protected content. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports connect to USB 2.0/1.1 devices. ASUS M5A78L-M/USB3 1-21...
  • Page 32: Front Panel Audio Connector

    1.10.2 Internal connectors Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP PIN 1 PIN 1...
  • Page 33: Atx Power Connectors

    The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS M5A78L-M/USB3...
  • Page 34 Serial ATA connectors (7-pin SATA3G_1~6) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the standard parallel ATA with 133MB/s (Ultra DMA133).
  • Page 35: System Panel Connector

    ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS M5A78L-M/USB3 1-25...
  • Page 36: Usb Connectors

    USB connectors (10-1 pin USB78, USB910, USB1112) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed.
  • Page 37 These are not jumpers! DO NOT place jumper caps on the fan connectors. Only the 4-pin CPU fan supports the ASUS Q-Fan feature. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
  • Page 38: Software Support

    The contents of the Support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. To run the Support DVD Place the Support DVD into the optical drive.
  • Page 39: Chapter 2: Bios Information

    BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility. 2.1.1 ASUS Update The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. ®...
  • Page 40: Asus Ez Flash 2

    Follow the onscreen instructions to complete the updating process. 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility. Before you start using this utility, download the latest BIOS file from the ASUS website at www.asus.com.
  • Page 41: Asus Crashfree Bios 3

    2.1.3 ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file.
  • Page 42: Bios Setup Program

    • The BIOS setup screens in this chapter are for reference only. They may not exactly match what you see on your screen. • Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. Chapter 2: BIOS information...
  • Page 43: Bios Menu Screen

    At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. ASUS M5A78L-M/USB3...
  • Page 44: Menu Items

    2.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, Tools, and Exit) on the menu bar have their respective menu items.
  • Page 45: Main Menu

    SATA device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD] This item only appears in the SATA5/6 menus. ASUS M5A78L-M/USB3...
  • Page 46: Sata Configuration

    LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-Sector Transfer) Mode [Auto] Enables or disables data multi-sectors transfers.
  • Page 47: System Information

    This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. BIOS information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. ASUS M5A78L-M/USB3...
  • Page 48: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. M5A78L-M/USB3 BIOS Setup Version 0201 Main Advanced...
  • Page 49 Sets the HT over voltage. The values range from 1.20000V to 1.38000V with a 0.01000V increment. Use the <+> / <-> keys to adjust the value. Configuration options: [Auto] [Max. = 1.38000V] [Min. = 1.20000V] Memory Clock Mode [Auto] Configuration options: [Auto] [Manual] ASUS M5A78L-M/USB3 2-11...
  • Page 50: Dram Timing Configuration

    The following items only appear when you set Memory Clock Mode to [Manual]. Memory Clock Speed [400MHz] Selects the memory clock frequency programming method. Configuration options: [400MHz] [533MHz] [667MHz] [800MHz] DRAM Timing Configuration The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
  • Page 51: Cpu Configuration

    Enable the Unleashing Mode to get full computing power of the processor. However, this might make your system unstable depending on your processor’s overclocking capability. Configuration options: [Enabled] [Disabled] Active CPU Cores [Auto] Allows you to manually turn ON/OFF a process core. Configuration options: [Auto] [Manual] ASUS M5A78L-M/USB3 2-13...
  • Page 52: Chipset

    2nd / 3rd / 4th / 6th / 8th Core [On] These items only appear when you set Active CPU Cores to [Manual]. Configuration options: [On] [Off] Value (All Cores) [-2%] This item only appears when you set Advanced Clock Calibration to [All Cores]. It allows you to set the overclocking percentage for all the processor cores as a whole.
  • Page 53: Onboard Devices Configuration

    Enables or disables the onboard LAN controller. Configuration options: [Disabled] [Enabled] OnBoard LAN Boot ROM [Disabled] Enables or disables the onboard Gigabit LAN Boot ROM. Configuration options: [Disabled] [Enabled] USB 3.0 Controller [Enabled] Enables or disables the onboard USB 3.0 controller. Configuration options: [Disabled] [Enabled] ASUS M5A78L-M/USB3 2-15...
  • Page 54: Pcipnp

    2.4.5 PCIPnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. Take caution when changing the settings of the PCI PnP menu items.
  • Page 55: Power Menu

    Power on From S5 By PME# [Disabled] Enables or disables PME wake from sleep states. Configuration options: [Disabled] [Enabled] Power on From S5 By Ring [Disabled] Enables or disables ring to generate a wake event. Configuration options: [Disabled] [Enabled] ASUS M5A78L-M/USB3 2-17...
  • Page 56: Hw Monitor Configuration

    CPU Q-Fan Function [Enabled] Enables or disables the ASUS Q-Fan feature that smartly adjusts the CPU fan speeds for more efficient system operation. Configuration options: [Disabled] [Enabled] The following item appears only when you set CPU Q-Fan Function to [Enabled].
  • Page 57: Boot Menu

    Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled] • To select the boot device during system startup, press <F8> when ASUS logo appears. • To access Windows OS in Safe Mode, do any of the following: Press <F5>...
  • Page 58: Security

    Bootup Num-Lock [On] Selects the power-on state for the NumLock. Configuration options: [Off] [On] Wait for ‘F1’ If Error [Enabled] When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] Hit ‘DEL’...
  • Page 59: Change User Password

    Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always] ASUS M5A78L-M/USB3 2-21...
  • Page 60: Tools Menu

    2.7.1 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice. See section 2.1.2 for details.
  • Page 61: Exit Menu

    When you select this option or if you press <F5>, a confirmation window appears. Select OK to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. ASUS M5A78L-M/USB3 2-23...
  • Page 62 2-24 Chapter 2: BIOS information...
  • Page 63: Asus Contact Information

    +1-510-739-3777 +1-510-608-4555 Web site usa.asus.com Technical Support Telephone +1-812-282-2787 Support fax +1-812-284-0883 Online support support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales Technical Support Telephone (Component) +49-1805-010923*...

Table of Contents