e) keyboard
f) optical drive
g) right base panel
h) palmrest
3.
Remove the screws that secure the ExpressCard reader cage in place.
4.
Remove the ExpressCard reader cage from the computer.
Installing the ExpressCard Reader Cage
1.
Align the ExpressCard reader cage to its original position in the computer and snap it into place.
2.
Install the screws that secure the ExpressCard reader cage.
3.
Install:
a) palmrest
b) right base panel
c) optical drive
d) keyboard
e) keyboard trim
f) access panel
g) battery
h) SD memory card
4.
Follow the procedures in
Removing the Bluetooth Module
1.
Follow the procedures in
2.
Remove:
a) SD memory card
b) battery
c) bottom door
d) keyboard trim
e) keyboard
f) optical drive
g) processor door
h) palm rest
3.
Disconnect the Bluetooth cable from the system board and remove the screw that secures the Bluetooth module in
place.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31