Installing The Expresscard Cage; Removing The Power-Connector Port - Dell Latitude E6530 Owner's Manual

Installing the ExpressCard Cage

1. Place the ExpressCard cage into its compartment.
2. Tighten the screws to secure the ExpressCard cage to the computer.
3. Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery
4. Follow the procedures in

Removing the Power-Connector Port

1. Follow the procedures in
2. Remove:
a) battery
b) base cover
3. Disconnect the power-connector cable from the system board.
4. Remove the screw that secures the power-connector bracket to the computer.
5. Remove the power-connector bracket from the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31