Removing The Input/Output (I/O) Board; Installing The Input/Output (I/O) Board - Dell Latitude E5530 Owner's Manual

p) SD memory card
4. Follow the procedures in

Removing the Input/Output (I/O) Board

1. Follow the procedures in
2. Remove:
a) SD memory card
b) battery
c) bottom door
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) WLAN card
i) processor door
j) thermal module
k) palmrest
l) ExpressCard reader cage
m) display assembly
n) right support frame
o) left support frame
p) system board
3. Remove the screws that secure the Input/Output (I/O) board in the computer.
4. Lift the Input/Output (IO) board out of the computer.

Installing the Input/Output (I/O) Board

1. Place the Input/Output (I/O) board in the computer.
2. Tighten the screw to secure the Input/Output (I/O) board to the computer.
3. Install:
a) system board
b) left support frame
c) right support frame
d) display assembly
e) ExpressCard reader cage
44
After Working Inside Your Computer .
Before Working Inside Your Computer .