Installing The Power Connector; Removing The System Fan - Dell Latitude E5530 Owner's Manual

4. Remove the power connector.

Installing the Power Connector

1. Install the power connector in the computer.
2. Thread the power connector cable in the routing channel.
3. Install:
a) system board
b) left support bracket
c) display assembly
d) ExpressCard reader cage
e) palmrest
f) thermal module
g) processor door
h) WLAN card
i) hard drive
j) optical drive
k) keyboard
l) keyboard trim
m) bottom door
n) battery
o) SD memory card
4. Follow the procedures in

Removing the System Fan

1. Follow the procedures in
2. Remove:
a) SD memory card
b) battery
c) bottom door
d) keyboard trim
46
After Working Inside Your Computer .
Before Working Inside Your Computer .