7. Type the user name and password.
NOTE: The default user name is Administrator and the default password is password. The
user name and password are case-sensitive.
8. Click OK. The EWS interface opens with the View page open and the Switch or
Director page displayed.
Configuring SNMP
Perform this procedure to configure community names, write authorizations, network
addresses, and user datagram protocol (UDP) port numbers for up to six SNMP trap
message recipients. A trap recipient is a management workstation that receives
notification (through SNMP) if a switch event occurs. To configure SNMP trap
recipients:
1. Choose Configure from the navigation panel.
2. Choose the Management tab. The Management and SNMP tab views display
(Figure
2–8).
Figure 2–8: Configure SNMP parameters tab view
embedded web server user guide
Configuring the Product
2–15