Type the drive path and name of the firmware file or click Browse to locate the file.
When the correct filename is in the box, click Send & Load Firmware. When the
firmware has finished transferring, a message displays stating that the new firmware is
being activated on the product and the product will be unavailable temporarily. You
must reconnect to EWS after this period by logging back into EWS.
NOTE: You can verify the firmware was upgraded by viewing the Unit Properties tab under the
View page. See
Viewing Unit Properties on page
4-9.
Activating (Installing) Optional Features
This procedure is described in
Installing Feature Keys on page
2-22. Please refer to
that procedure for information.