Viewing the User Interface
When the EWS interface opens, the default display is the View page.
shows an example EWS view with labels for the various parts of the image. This
example shows the Configure > Switch > Identification screen for the
Edge Switch 2/24. For other products, the corresponding page looks very similar.
Figure 1–1: Example Embedded Web Server page for Edge Switch 2/24
As shown in
•
Navigation panel — at the left of the screen is a menu of the various primary
views available on the screen. The navigation panel options include:
— View — At the View page, the Director or Switch (default), Port Properties,
FRU Properties, Unit Properties, Operating Parameters, and Fabric task
selection tabs display.
embedded web server user guide
Figure
1–1, particular terms are used when describing the EWS interface:
Introduction
Figure 1–1
1–3