Configuring the Product
Enabling or Disabling Host Control
Perform this procedure to enable or disable host control of the product through the
OSMS. The OSMS feature must be installed to access this control. Refer to
Feature Keys on page 2-22
Feature not installed displays. To enable or disable host control:
1. Choose Configure from the navigation panel.
2. Choose the Management tab and the OSMS tab. The OSMS tab view displays
(Figure
2–10).
Figure 2–10: Enabling OSMS host control
3. Perform one of the following steps as required:
a. Click Enable to activate the OSMS. The message Your changes to
the host control enable state have been successfully
activated displays.
b. Click Disable to deactivate the OSMS. The message Your changes to
the host control enable state have been successfully
activated displays.
2–18
for instructions. If the feature is not installed, the message
Installing
embedded web server user guide