Table of Contents
Advertisement
4
Listen for voice activity.
•
The LED indicator flashes red while your
radio is receiving.
5
To respond, hold the radio vertically 1 to 2
inches (2.5 to 5cm) from your mouth. Press
the PTT button to talk; release it to listen.
MONITOR
It is important to monitor for traffic before
transmitting to ensure that you do not "talk
over" someone who is already transmitting.
1
Press and hold the preprogrammed Monitor
button to access channel traffic.
•
If no activity is present, you will hear "white
noise."
2
Once channel traffic has cleared, proceed
with your call by pressing the PTT button.
Permanent Monitor
1
A long press of the preprogrammed Monitor
button places the radio in Permanent Monitor
mode.
•
You hear a good key tone.
2
A short press of the Monitor button cancels
Permanent Monitor mode and returns the
radio to normal operation.
29
English
Advertisement
Table of Contents
