Rear Panel Description - Dynaudio Air Series User Manual

REAR PANEL DESCRIPTION - MASTER
Master Unit - Analog I/O
Slave/Sub
Optional Digital I/O card
16
• System Controller/Slave switch
Out-position :The monitor operates as a
System Controller
There can be only one System
Controller in a setup.
In -position:
The monitor operates as either a regular
Master or a Slave unit.
• RJ45 Link connections for downstream Slave units
• Option slot with analog I/O card installed. (optional)
• AES/EBU digital Input
• Word Clock BNC sync
• Power Input 100-240V
• Power On/Off - switch
• RJ45 Link connections for downstream Slave units
• Power Input 100-240V
• Power On/Off - switch
Optional Digital I/O card
With this card installed in the Master Monitor option slot a
5.1 Digital/6 Master setup becomes an option.
Three AES/EBU connections (6 channels) can then be fed
to one Master monitor and distributed downstream.
For further information see "Setups".