Setup Page
Units Page
Pressure Units
Angle Units
46
Pressure
To change Pressure units:
1. From the MENU Page, press the UP or DOWN button to highlight 'SETUP'. Press ENTER.
2. Press the UP or DOWN button to select 'UNITS'. Press ENTER. The UNITS Page appears.
3. Press the UP or DOWN button to select the 'PRESSURE' field. Press ENTER.
4. Press the UP or DOWN button to select 'INCHES' or 'MILLIBARS'. Press ENTER. Press
PAGE to select the page of your choice.
Angle
You can set the eTrex Summit to display directional information in 'DEGREES' or in
'MILS'.
To select an Angle setting:
1. From the MENU Page, press the UP or DOWN button to highlight 'SETUP'. Press ENTER.
2. Press the UP or DOWN button to select 'UNITS'. Press ENTER. The UNITS Page appears.
3. Press the UP or DOWN button to select the 'ANGLE' field. Press ENTER.
4. Press the UP or DOWN button to select 'DEGREES' or 'MILS'. Press ENTER. Press PAGE
to select the page of your choice.