Dist/Speed And Elevation/Vspd Units; Units Page - Garmin eTrex Summit - Hiking GPS Receiver Owner's Manual

To change the Map Datum:
1. From the MENU Page, press the UP or DOWN button to highlight 'SETUP'. Press ENTER.
2. Press the UP or DOWN button to select 'UNITS'. Press ENTER. The UNITS Page appears.
3. Press the UP or DOWN button to select the 'MAP DATUMS' field. Press ENTER.
4. Press the UP or DOWN button to select the desired datum. Press ENTER.
Distance/Speed Units
The eTrex Summit lets you select statute (the default setting), nautical, or metric units of
measure for all speed and distance readouts.
To change the Distance/Speed units:
1. From the MENU Page, press the UP or DOWN button to highlight 'SETUP'. Press ENTER.
2. Press the UP or DOWN button to select 'UNITS'. Press ENTER. The UNITS Page appears.
3. Press the UP or DOWN button to select the 'UNITS' field. Press ENTER.
4. Press the UP or DOWN button to select the desired unit. Press ENTER. Press PAGE to
select the page of your choice.
Elevation/VSPD (vertical speed)
The eTrex Summit lets you select feet or meters for elevation and vertical speed readings.
To change the Elevation/VSPD units:
1. From the MENU Page, press the UP or DOWN button to highlight 'SETUP'. Press ENTER.
2. Press the UP or DOWN button to select 'UNITS'. Press ENTER. The UNITS Page appears.
3. Press the UP or DOWN button to select the 'ELEVATION/VSPD' field. Press ENTER.
4. Press the UP or DOWN button to select 'FEET' or 'METERS'. Press ENTER. Press PAGE to
select the page of your choice.
Setup Page

Units Page

You can select statute, nautical, or metric units
of measurement from the 'UNITS' page.
The 'DEFAULTS' setting will reset the eTrex
Summit units to all of its factory settings.
45