Trip Computer Page
Trip Computer Data Fields
•
Bearing* — the compass direction from your location to your destination.
•
Course* — the direction from your starting location to a destination.
•
Elevation — the measurement of height above mean sea level.
•
Final Dest* — (Final Destination) the last waypoint on your route.
•
Final Dist* — (Final Distance) the distance from your location to your destination.
•
Final ETA* — the estimated time you will arrive at your destination.
•
Final ETE* — the estimated total time left until you reach your destination.
•
Heading — the direction you are traveling.
Lat/Lon — the current GPS position.
•
Location — shows your current latitude and longitude.
•
Max Speed — the maximum speed traveled since last reset.
•
Moving Avg — (Moving Average) the average speed while the unit is moving.
•
Next Dest* — (Next Destination) the next waypoint on your route.
•
•
Next Dist* — (Next Distance) the distance between your current location and the
next waypoint.
•
Next ETA* — the estimated time you will arrive at the next waypoint.
•
Next ETE* — the estimated total time left until you reach the next waypoint.
Odometer — a running tally of distance traveled, based upon the distance between
•
second-by-second position readings.
20
•
Off Course*— the distance you are off a desired course in either direction, left or right.
•
Over'l Spd — (Overall Speed) the averaged speed since your last reset, including
stopped and moving time.
•
Speed — shows how fast you are going.
•
Sunrise — the time at which the sun rises on this day at the current location.
•
Sunset — the time at which the sun sets on this day at the current location.
•
Time of Day — the current time for the selected time zone.
•
Time-Moving — the time elapsed while the unit is moving since the last trip reset.
•
Time-Stop — the time elapsed while the unit is not moving since the last trip reset.
•
Time-Total — the total time you have traveled since the last trip reset.
•
To Course* — the compass direction you must go to get back to the original course.
Trip Odometer — the total distance you've gone since the last reset.
•
Turn* — the angle difference (in degrees) from the bearing to your destination and your
•
current line of travel. 'L' means turn Left, 'R' means turn Right.
•
Vert Speed — (Vertical Speed) the rate of altitude gain/loss over time.
•
VMG* — (Velocity Made Good) the speed you are closing in on a
destination along a desired course. Also referred to as the 'vector velocity' to your
destination.
Fields marked with an asterisk (*) only display data while you are actively navigating.