Distance/Speed, Elevation, And Vertical Speed; Defaults - Garmin Foretrex 201 Owner's Manual

Distance/Speed, Elevation, and Vertical Speed

The Foretrex 201 allows you to customize speed and distance readouts.
To change the Distance/Speed, Elevation, or Vertical Speed:
1. Press the PAGE button until the Main Menu Page is displayed. Use the
buttons to highlight 'SETUP' and press
2. Use the UP and DOWN
3. Press the UP or DOWN
or 'VSPD') and press the
4. Use the and
UP DOWN
ENTER.
5. Press the PAGE button to return to the Main Menu page.

Defaults

You can easily set the Foretrex units back to the default settings.
To set the units to the defaults:
1. Press the PAGE button until the Main Menu Page is displayed. Use the
buttons to highlight 'SETUP' and press
2. Use the UP and DOWN
3. Press the or
UP DOWN
ENTER .
buttons to highlight 'SET UNITS' and press
button to highlight the specific unit ('Distance/Spd', Elevation',
ENTER button.
buttons to highlight the desired unit measurement and press
ENTER .
buttons to highlight 'SET UNITS' and press
button to highlight 'DEFAULTS' and press the
Setup Menu: Set Units
UP and DOWN
ENTER.
UP and DOWN
ENTER.
button.
ENTER
Main Pages
Set Units Page
Selecting the Map Datum
49