Side Connections Panel / Rf Antenna & Mpi Connections - LG 26LD320H Setup Manual

Reference: Side Connections Panel / RF Antenna & MPI Connections
Side Connections Panel
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
RF Antenna & MPI Connections
Notes:
•
On 26LD320H, 26LD340H, and 26LD345H
TVs, the RF Antenna jack is on the rear jack
panel (see previous page).
•
On 26LD320H and all LD340H and LD345H
TVs, the MPI port is located on the rear jack
panel (dual-purpose GAME CONTROL/MPI
port).
52
USB IN
AV IN 2
Antenna
or CATV
A/V 2 Input
L/MONO-AUDIO-R IN
Connect to audio output jacks
on external device. For only
mono audio output, connect to
Left audio input.
VIDEO IN
Connect to video output port on
external device (see Reference
section, "TV Camport Auto Sense
Operation," for further information).
ANTENNA IN
Connect to Antenna/
CATV.
MPI
Enables an external MPI control
device (i.e., clone programmer, VOD/
PPV STB, etc.) to control the TV when
the EBL is in Pass-through Mode.
206-4186