Master Tv Setup; Before You Begin; Cloning Methods; Clonable Tv Setup Menu Features - LG 26LD320H Setup Manual

This section describes how to set up a Master TV for cloning purposes when the TV is in Pass-through
Mode.
Note: Refer to FTG Mode information on pages 30 to 40 for details on entering FTG Mode and
configuring/editing FTG Channel Map and FTG Installer Menu settings.

Before You Begin

• Disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search). Under certain conditions,
Auto Tuning is disabled if there is an Aux input active.
• Determine which cloning tool—USB memory device or clone programmer—is appropriate for your
application. See "Cloning Methods" below for further information.

Cloning Methods

Using a USB Memory Device / .tll File
The .tll file format clones the contents of the commercial controller (PTC) memory, including an auto-tuned/
edited Channel Map, Installer Menu settings, and one TV source's (analog, digital, or Aux) clonable setup
menu settings. See "Clonable TV Setup Menu Features" list below.
Using a Clone Programmer (TLL-1100A or LT2002)
Both the TLL-1100A and LT2002 clone the contents of the commercial controller (PTC) memory, including
an auto-tuned/edited Channel Map, Installer Menu settings, and one TV source's (analog or Aux) clonable
setup menu settings. See "Clonable TV Setup Menu Features" list below.

Clonable TV Setup Menu Features

Channel
Auto Tuning (Channel Lineup)
Manual Tuning
Channel Edit
Channel Label
Picture
Aspect Ratio
Picture Mode
Note: Some menu options vary between analog and digital channels and Aux inputs.
206-4186
Audio
Auto Volume
Clear Voice
Sound Mode
Balance
TV Speaker
Time
Auto Clock
Auto Off (Sleep Timer)
Option
Menu Language
Audio Language
Caption
Lock
Movie Rating
TV Rating – Children
TV Rating – General

Master TV Setup

11