Page of 220

LG 22LE3300 Owner's Manual

22" hd ready led tv with 2 x hdmi and usb connectivity.
OWNER'S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com

   Related Manuals for LG 22LE3300

   Summary of Contents for LG 22LE3300

  • Page 1

    OWNER’S MANUAL LCD TV / LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...

  • Page 2

    Separate purchase Wall Mounting Bracket LSW200B or LSW100B or LSW200BG LSW100BG (19/22/26/32LD3 *** , (37/42/47LD4 *** , 32LD4 *** , 32LD5 *** , 42/46LD5 *** , 19/22/26/32LE3 *** , 32LE4 *** , 22/26LE5 *** , 37/42/47LE5 *** ) 32LE5 *** ) HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or regis- tered trademarks of HDMI Licensing LLC.

  • Page 3: Table Of Contents

    CONTENTS PREPARATION LCD TV Models : 19/22/26/32LD35 **, 19/22/26/32LD34 ** ... A-1 LCD TV Models : 32/37/42/47LD4 *** , 26/32LD32 ** ... A-14 LCD TV Models : 32/42/46/52/60LD5 *** ... A-24 LED LCD TV Models : 19/22/26/32LE3 *** , 32/37/ 42LE4 *** , 22/26LE5 ***, 32/37/42/47/55LE5 *** ...

  • Page 4: Table Of Contents

    CONTENTS PICTURE CONTROL Picture Size (Aspect Ratio) Control ...92 Picture Wizard ...94 Energy Saving ...95 Preset Picture Settings ...96 Manual Picture Adjustment ...97 Picture Improvement Technology ...98 Expert Picture Control ...99 Picture Reset ...102 Trumotion ...103 Power Indicator ...104 Mode Setting ...105 Demo Mode ...106 SOUND &...

  • Page 5

    PREPARATION LCD TV MODELS : ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Owner’s Manual Batteries (AAA) Ferrite Core...

  • Page 6

    PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.

  • Page 7

    BACK PANEL INFORMATION Only 19/22LD35 ** , 19/22LD34 ** ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

  • Page 8

    PREPARATION Only 26LD35 ** , 26LD34 ** ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

  • Page 9

    Only 32LD35 ** , 32LD34 ** ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

  • Page 10

    PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

  • Page 11

    NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Only 19/22LD35 ** , 19/22LD34 ** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

  • Page 12

    PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Only 19/22LD35 ** , 19/22LD34 ** After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. Only 26/32LD35 ** , 26/32LD34 ** Connect the cables as necessary.

  • Page 13

    SWIVEL STAND (Except for 19/22LD35 ** , 19/22LD34 ** ) ■ Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. POSITIONING YOUR DISPLAY (Only 19/22LD35 ** , 19/22LD34 ** ) ■...

  • Page 14

    PREPARATION KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

  • Page 15

    10 cm 10 cm WALL MOUNT: HORIZONTAL INSTALLATION ■ We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. ■ We recommend that you purchase a wall mount- ing bracket which supports VESA standard.

  • Page 16

    PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. A-12 Switches the TV on from standby or off to standby. (POWER) ENERGY Adjust the Energy Saving mode of the SAVING AV MODE It helps you select and set images and sounds...

  • Page 17

    VOLUME UP Adjusts the volume. /DOWN Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92 ) MUTE Switches the sound on or off.

  • Page 18

    PREPARATION LCD TV MODELS : ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Owner’s Manual Ferrite Core (This item is not included for all models.)

  • Page 19

    FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.

  • Page 20

    PREPARATION Only 32/37/42/47LD42 ** , 26/32LD32 ** Only 26LD32 ** POWER INPUT SPEAKER Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. A-16 VOLUME MENU PROGRAMME Only 32/37/42/47LD42 ** , 32LD32 ** PROGRAMME VOLUME MENU...

  • Page 21

    BACK PANEL INFORMATION ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN.

  • Page 22

    PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

  • Page 23

    BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Open the Cable Management Clip as shown. Cable Management Clip Fit the Cable Management Clip as shown. NOTE ►Do not use the Cable Management Clip to lift the TV.

  • Page 24

    PREPARATION KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

  • Page 25

    Further information , refer to the instructions included with the mount. ► LG is not liable for any accidents or damage to property or TV due to incorrect installation: - Where a non-compliant VESA wall mount is used.

  • Page 26

    PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. A-22 Switches the TV on from standby or off to standby. (POWER) ENERGY Adjust the Energy Saving mode of the SAVING It helps you select and set images and sounds AV MODE...

  • Page 27

    VOLUME UP Adjusts the volume. /DOWN Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92 ) MUTE Switches the sound on or off.

  • Page 28

    PREPARATION LCD TV MODELS : ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Owner’s Manual (This item is not included Power Cord M4 x 20...

  • Page 29

    FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.

  • Page 30

    PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN.

  • Page 31

    STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

  • Page 32

    PREPARATION ATTACHING THE TV TO A DESK (Only 32/42LD5 *** ) ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

  • Page 33

    KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

  • Page 34

    10 cm 10 cm WALL MOUNT: HORIZONTAL INSTALLATION ■ We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. ■ We recommend that you purchase a wall mounting bracket which supports VESA stan- dard.

  • Page 35

    REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Switches the TV on from standby or off to standby. (POWER) ENERGY Adjust the Energy Saving mode of the SAVING It helps you select and set images and sounds AV MODE when connecting AV External input mode rotate in regular...

  • Page 36

    PREPARATION A-32 VOLUME UP Adjusts the volume. /DOWN Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92 ) MUTE Switches the sound on or off.

  • Page 37

    LED LCD TV MODELS : 19/22/26/32LE3 *** , 32/37/42LE4 *** , 22/26LE5 *** , 32/37/42/47/55LE5 *** ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■...

  • Page 38

    PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.

  • Page 39

    BACK PANEL INFORMATION Only 19/22LE3 *** , 22LE5 *** ■ Image shown may differ from your TV. DC ADAPTER PORT Connect to the power cord socket. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

  • Page 40

    PREPARATION Only 26LE3 *** , 26LE5 *** ■ Image shown may differ from your TV. DC ADAPTER PORT Connect to the power cord socket. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.

  • Page 41

    Only 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** ■ Image shown may differ from your TV. Power Cord Socket This TV operates on an AC power. The volt- age is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.

  • Page 42

    PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

  • Page 43

    BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Only 19/22/26LE3 *** , 22/26LE5 *** After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. Cable Holder Only 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** Secure the power cord with the Cable Holder on the TV back cover.

  • Page 44

    PREPARATION ATTACHING THE TV TO A DESK (Only 32LE3 *** , 32LE4 *** , 32LE5 *** ) ■ Ima4e shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

  • Page 45

    KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

  • Page 46

    WALL MOUNT: HORIZONTAL INSTALLATION ■ We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. ■ We recommend that you purchase a wall mount- ing bracket which supports VESA standard.

  • Page 47

    REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. ■ Image shown may differ from your TV. Switches the TV on from standby or off to standby. (POWER) ENERGY Adjust the Energy Saving mode of the SAVING It helps you select and set images and sounds AV MODE...

  • Page 48

    PREPARATION A-44 VOLUME UP Adjusts the volume. /DOWN Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92 ) MUTE Switches the sound on or off.

  • Page 49: Antenna Connection

    EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket)

  • Page 50: Connecting With A Component Cable

    EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4 *** models. ■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE This TV can receive Digital RF/Cable signals without an external digital set-top box.

  • Page 51: Connecting With An Hdmi Cable

    CONNECTING WITH AN HDMI CABLE Connect the HDMI output of the external equipment (digital set- top box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3 *** ), HDMI IN 3 (Except for 19/22/26/32LD3 *** , 32/37/42/47LD4 *** , 19/22LE3 *** , 22LE5 *** ) or HDMI IN 4 (Only 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** ) jack on the Turn on the external equipment.

  • Page 52: Connecting With An Hdmi To Dvi Cable

    EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE Connect the digital set-top box or the DVI out- put of the PC to HDMI/DVI IN 1 jack on the Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

  • Page 53: Connecting With A Euro Scart Cable

    CONNECTING WITH A EURO SCART CABLE Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV. Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) Select AV1 input source using the INPUT but- ton on the remote control.

  • Page 54: Usb Setup, Connecting With A Rf Cable

    EXTERNAL EQUIPMENT SETUP USB SETUP Connect the USB device to the USB IN jack on the TV. After connecting the USB IN jack, you use the USB function. ( ► CONNECTING WITH A RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

  • Page 55: Connecting With A Rca Cable

    CONNECTING WITH A RCA CABLE Connect the AUDIO/VIDEO jacks between TV and VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR.

  • Page 56: Connecting With A D-sub 15 Pin Cable

    EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set- tings. Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

  • Page 57: Insertion Of Ci Module, Headphone Setup

    INSERTION OF CI MODULE To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries. Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.34.

  • Page 58: Digital Audio Out Setup

    EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio ( Optical ) Output port.

  • Page 59: External Equipment Wireless Connection

    (Only 32/42/46/52/60LD5 *** , 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** ) You can connect between TV and external equipment wirelessly. For further information, refer to the “LG Wireless Media Box” manual for operating instructions. Connect the Wireless Media Box to the...

  • Page 60: Supported Display Resolution

    EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode Horizontal Resolution Frequency(kHz) 720x400 31.468 640x480 31.469 800x600 37.879 1024x768 48.363 1280x768 47.78 1360x768 47.72 1280x1024 63.981 1920x1080 66.587 (RGB-PC) 1920x1080 66.587 (HDMI-PC) (Except for 19/22/26LD3 *** , 26/32LD32 ** , 32LD34 ** , 19/22/26/32LE3 *** ) NOTE ►...

  • Page 61: Screen Setup For Pc Mode

    SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. PICTURE • Sharpness • Colour • Tint • Colour Temp. • Advanced Control • Picture Reset •...

  • Page 62

    EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.

  • Page 63

    Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] PICTURE Move • Sharpness • Colour • Tint • Colour Temp. • Advanced Control •...

  • Page 64

    EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. PICTURE •...

  • Page 65: Turning On The Tv, Initializing Setup, Programme Selection, Volume Adjustment

    WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the or press the POWER, INPUT, P will switch on.

  • Page 66: Quick Menu

    WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture for- mat.

  • Page 67: On Screen Menus Selection And Adjustment

    ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. SETUP Move Auto Tuning ● Manual Tuning ● Programme Edit ● CI Information ● LOCK Move Set Password ● Lock System : Off ●...

  • Page 68: Auto Programme Tuning

    WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1,000. But the number may differ slightly depending on broadcasting signals.

  • Page 69

    If you want to select the Cable, SETUP Move Auto Tuning ● Auto Tuning ● Manual Tuning ● Programme Edit ● CI Information ● Cable DTV Setting ● Select SETUP. Select Auto Tuning. Select Cable. Select Comhem or Other Operators. Select Quick or Full.

  • Page 70

    WATCHING TV / PROGRAMME CONTROL ■ When you select the Quick, Quick Start Frequency(kHz) : 114000 End Frequency(kHz) : 862000 Network : Auto Setting Close Select Quick. Select Setting. Select Close. Select OK. Select Start. Run Auto tuning. Home Tuning ◄...

  • Page 71

    ■ When you select the Full, Full Search every available signal. Close Select Full. Select OK. Select Start. Run Auto tuning. Cable Cable Check your antenna connection. The previous channel information will be updated during Auto Tuning. Skip Scramble Programme Automatic Numbering Start Close...

  • Page 72

    WATCHING TV / PROGRAMME CONTROL The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels.

  • Page 73: Cable Dtv Setting

    CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation. After changing Service Operator, a warning window saying that channel map will be deleted when OK button is pressed or Close is selected, and a Auto-tuning pop-up window appears when ‘YES’...

  • Page 74: Manual Programme Tuning

    WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. If you want to select the Antenna, SETUP Auto Tuning ● Manual Tuning Manual Tuning ● ● Programme Edit ●...

  • Page 75

    If you want to select the Cable, SETUP Move Auto Tuning ● Manual Tuning Manual Tuning ● ● Programme Edit ● CI Information ● Cable DTV Setting ● Select SETUP. Select Manual Tuning. Select Cable DTV. Make appropriate adjustments. SETUP ◄...

  • Page 76

    WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP Move Auto Tuning ● Manual Tuning Manual Tuning ● ● Programme Edit ● CI Information ●...

  • Page 77

    SETUP Move Auto Tuning ● Manual Tuning Manual Tuning ● ● Programme Edit ● CI Information ● ■ Assigning a station name You can assign a station name with five characters to each programme number. Select SETUP. Select Manual Tuning. Select TV or Cable TV.

  • Page 78: Programme Edit

    WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.

  • Page 79

    IN DTV/RADIO MODE ■ Skipping a programme number Select a programme number to be skipped. BLUE Turn the programme number to blue. BLUE Release. ■ Locking a programme number Select a programme number to be locked. YELLOW Turn the programme number to yellow. YELLOW Release.

  • Page 80

    WATCHING TV / PROGRAMME CONTROL ■ Skipping a programme number Select a programme number to be skipped. BLUE Turn the programme number to blue. BLUE Release. ■ Auto Sort Start Auto Sort. ■ Locking a programme number Select a programme number to be locked. YELLOW Turn the programme number to yellow.

  • Page 81

    ■ Selecting favourite programme group Select your desired programme. Display a pop-up window where Favourite group can be changed. Select a Favourite group.

  • Page 82: Ci [common Interface] Information

    WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer.

  • Page 83: Software Update

    SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP PICTURE AUDIO LOCK INPUT OPTION Press OK( ) to set programme settings. Customer Support Simple Manual Select Customer Support. Select Software Update. Select On or Off. •...

  • Page 84

    WATCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally, a transmission of updated digital software infor- mation will result in the following menu on the TV screen. Software update is available. Would you like to download now? Simple Update : for current update stream A new software update is available at 00/00/0 00:00.

  • Page 85: Picture/sound Test

    PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. SETUP PICTURE AUDIO LOCK INPUT OPTION Press OK( ) to set programme settings. Customer Support Simple Manual Select Customer Support. Select Picture Test or Sound Test. Select Yes or No.

  • Page 86: Diagnostics

    • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. Engineering Diagnostics Manufacturer : LG Electronics Inc. Model/Type : 42LD450-ZA Serial No. : SKJY1107 Software Version : V00.00.01...

  • Page 87: Product/service Information

    PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. SETUP PICTURE LOCK OPTION Press OK( ) to set programme settings. Customer Support Select Customer Support. Select Product/Service Info.. Display MODEL/TYPE, Software version, Serial Number, Used time, Customer service center and Homepage.

  • Page 88: Simple Manual

    WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. SETUP PICTURE LOCK OPTION Press OK( ) to set programme settings. Customer Support Select Simple Manual.

  • Page 89: Selecting The Programme List

    SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Programme List Displayed when the Locked Programme. ■ Displaying programme LIST Display the Programme List. ■ Selecting a programme in the programme list Select a programme.

  • Page 90

    WATCHING TV / PROGRAMME CONTROL ■ Paging through a programme list Turn the pages. ■ Displaying the favourite programme Favourite List Exit ◄ ►Favourite Pr. Group ◄ Group ► 1 BBC 2 BBC 3 BBC Pr.Reg. Pr.Edit Display the Favourite Programme List. Return to normal TV viewing.

  • Page 91: Input List

    INPUT LIST HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro- gramme in DTV/RADIO/TV mode.

  • Page 92: Input Label

    WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. ■ Image shown may differ from your TV. Input List Antenna HDMI1 HDMI2 Select Input Label. BLUE Select the source. Select the label. Move Component HDMI3 HDMI4 Exit Input Label...

  • Page 93: Data Service

    DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you select- OPTION Move Language(Language)

  • Page 94: Simplink

    WATCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable with- out additional cables and settings.

  • Page 95

    Connecting to Home Theater with the SIMPLINK logo. Connect the HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3 *** ), HDMI IN 3 (Except for 19/22/26/32LD3 *** , 32/37/42/47LD4 *** , 19/22LE3 *** , 22LE5 *** ) or HDMI IN 4 (Only 32LE3 *** , 32/42/47LE4 *** , 32/37/42/47/55LE5 *** ) terminal on the back of the TV and the HDMI output terminal of the...

  • Page 96

    WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the , OK, ►, ▀ , l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional set- tings.

  • Page 97

    SIMPLINK Menu Press the button and then OK button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV pro- gramme regardless of the current mode. DISC playback : Select and play connected discs. When multiple discs are available, the device type of discs are conveniently displayed at the bottom of the screen.

  • Page 98

    WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Disables the AV MODE. Cinema Optimizes video and audio for watching movies. Sport Optimizes video and audio for watching sports events. Game Optimizes video and audio for playing games.

  • Page 99: Initializing(reset To Original Factory Settings)

    INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears.

  • Page 100: When Connecting A Usb Device

    TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat- When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu.

  • Page 101

    Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized. ►...

  • Page 102: Movie List

    TO USE A USB DEVICE MOVIE LIST (Only 19/22/26/32LE3 *** , 32/37/42LE4 *** , 22/26LE5 *** , 32/37/42/47/55LE5 *** ) You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play.

  • Page 103

    File Video Decoder Extension name mpg, mpeg MPEG1, MPEG2 MPEG1 ts,trp,tp MPEG2, H.264, AVS, VC1 MPEG1, 2 MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, mp4, mov DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 H.264, MPEG-1,2,4 MPEG2, MPEG4,DivX 3.11, DivX 4. DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, divx, avi Xvid 1.02, Xvid 1.03, Xvid...

  • Page 104

    TO USE A USB DEVICE Screen Components You can also adjust USB in the INPUT menu. Select MY MEDIA. Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on Current page/ total pages of contents under the folder focused on •...

  • Page 105

    Movie Selection ■ When playing movie files Movie List To Photo List Select the target folder or drive. Select the desired movie title. Movie files are played. Using the remote control GREEN Repeatedly, press the GREEN button to converted to Photo List->Music List. YELLOW A method to view in 5 large thumbnail or simple list.

  • Page 106

    TO USE A USB DEVICE ■ When selected movie files are played Movie List Mark Mode Play Marked Mark All Select the target folder or drive. Select the desired movie title. Convert to Mark Mode. BLUE Mark desired Movie file. Marked movie file is played.

  • Page 107

    Using the remote control Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode. Return to normal TV viewing.

  • Page 108

    TO USE A USB DEVICE Using the Movie List function, play ◄► ► ■ ► ◄◄ ►► Show the Option menu. Select Set Video Play., Set Video. or Set Audio.. NOTE ► Option values changed in Movie List does not affect Photo List and Music List. ►...

  • Page 109

    Using the remote control ■ Stop the playing movie file. Press the PLAY ( ► ) button to return to normal playback. ► During playback, press the Pause ( II ) button. ■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.

  • Page 110

    TO USE A USB DEVICE ■ When you select the Set Video Play, Set Video Play. Picture Size ◄ Audio Language ◄ Subtitle Language ◄ ● Language English ◄ ● Code page Default ◄ ● Sync ◄ ● Position ◄ ●...

  • Page 111

    ■ When you select the Set Video, Set Video. Picture Mode Standard ◄ ● Backlight ◄ ● Contrast ◄ ● Brightness ◄ ● Colour ◄ ● Dynamic Contrast Medium ◄ ● Edge Enhancer High ◄ ● Noise Reduction Medium ◄ TruMotion ◄...

  • Page 112

    TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ Auto Volume ◄ Clear Voice II ◄ Balance ◄ Previous Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p. 107 to 111) ►...

  • Page 113: Photo List

    PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440...

  • Page 114

    TO USE A USB DEVICE Photo Selection ■ When playing photo files Select the target folder or drive. Select the desired photos. Photo files are displayed. Using the remote control GREEN Repeatedly, press the GREEN button to converted to Music List->Movie List. YELLOW A method to view in 5 large thumbnail or simple list.

  • Page 115

    ■ When selected photo files are displayed Photo List Mark Mode View Marked Mark All Select the target folder or drive. Select the desired photos. Convert to Mark Mode. BLUE Mark desired photo file. Marked photo file is displayed. Page 1/1 Drive1 Page 1/1 Move...

  • Page 116

    TO USE A USB DEVICE Using the remote control Display the selected photo file. Mark all photo files on the screen. GREEN YELLOW Deselect all marked photo files. BLUE Exit the Mark Mode. Return to normal TV viewing.

  • Page 117

    How to view photo Detailed operations are available on full-sized photo view screen. Photo List Drive1 To Music List Change Numbers 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄ ◄ 2/13 Slideshow ► ■ Select the target folder or drive. Select the desired photos.

  • Page 118

    TO USE A USB DEVICE 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄ Slideshow ► ■ ► Slideshow : When no picture is selected, all photos in the cur- rent folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show.

  • Page 119

    Using the Photo List function 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄ ◄ 2/13 Slideshow ► ■ Show the Option menu. Select Set Photo View., Set Video. or Set Audio.. NOTE ► Option values changed in Movie List does not affect Photo List and Music List. ►...

  • Page 120

    TO USE A USB DEVICE ■ When you select the Set Photo View, Set Photo View. Slide Speed Fast ◄ Drive1 ● Repeat ◄ ● Random ◄ Previous Select Slide Speed or BGM. Make appropriate adjustments. ► ► ►...

  • Page 121

    ■ When you select the Set Video, Set Video. Picture Mode Standard ◄ ● Backlight ◄ ● Contrast ◄ ● Brightness ◄ ● Colour ◄ ● Dynamic Contrast Medium ◄ ● Edge Enhancer High ◄ ● Noise Reduction Medium ◄ TruMotion ◄...

  • Page 122

    TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ Auto Volume ◄ Clear Voice II ◄ Balance ◄ Previous Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p. 107 to 111) ►...

  • Page 123: Music List

    MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV.

  • Page 124

    TO USE A USB DEVICE Music Selection ■ When playing music files Select the target folder or drive. Select the desired music title. Music files are played. Using the remote control GREEN Repeatedly, press the GREEN button to converted to Movie List->Photo List. YELLOW A method to view in 5 large thumbnail or simple list.

  • Page 125

    ■ When selected music files are played Music List Mark Mode 001. - B01.mp3 00:00 005. - B05.mp3 00:00 Play Marked Select the target folder or drive. Select the desired music title. Convert to Mark Mode. BLUE Mark desired music file. Marked music file is played.

  • Page 126

    TO USE A USB DEVICE Using the remote control Display the selected music file. GREEN Mark all music files on the screen. YELLOW Deselect all marked music files. BLUE Exit the Mark Mode. Return to normal TV viewing.

  • Page 127

    Using the Music List function, play Music List 3 file(s) Marked Drive1 ► 004. - B04.mp3 005. - B05.mp3 006. - B06.mp3 00:00 00:00 00:00 ◄► ► 005. - B05.mp3 ■ ► ◄◄ ►► Play with Photo Show the Option menu. Select Set Audio Play.

  • Page 128

    TO USE A USB DEVICE Using the remote control ■ Stop the playing music file. Press the PLAY ( ► ) button to return to normal playback. ► When you press the Pause ( II ) button while playing the file, the playback will be paused.

  • Page 129

    ■ When you select the Set Audio Play, Set Audio Play. Repeat ◄ ► Random ◄ ► Previous Select Repeat or Random. Make appropriate adjustments.

  • Page 130

    TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ Auto Volume ◄ Clear Voice II ◄ Balance ◄ Previous Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p. 107 to 111) ►...

  • Page 131

    ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.

  • Page 132: Divx Registration Code

    TO USE A USB DEVICE DIVX REGISTRATION CODE (Only 19/22/26/32LE3 *** , 32/37/42LE4 *** , 22/26LE5 *** , 32/37/42/47/55LE5 *** ) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.

  • Page 133: Deactivation

    DEACTIVATION (Only 19/22/26/32LE3 *** , 32/37/42LE4 *** , 22/26LE5 *** , 32/37/42/47/55LE5 *** ) The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.

  • Page 134

    EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).

  • Page 135: Switch On/off Epg, Select A Programme, Button Function In Now/next Guide Mode

    Switch on/off EPG Switch on or off EPG. Select a programme Select desired programme. Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Change EPG mode. Enter Manual Timer mode. YELLOW BLUE Enter Schedule List mode.

  • Page 136: Button Function In 8 Day Guide Mode

    EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Change EPG mode. Enter Date setting mode. GREEN Enter Manual Timer mode. YELLOW BLUE Enter Schedule List mode. When ‘Currently broadcasting programme is selected, it is moved to selected pro- gramme and EPG disappears When ‘Future broadcasting programme is selected, a reservation pop-up window...

  • Page 137: Button Function In Date Change Mode, Button Function In Extended Description Box

    Button Function in Date Change Mode Switch off Date setting GREEN mode. Change to the selected date. Select a date. Switch off EPG. Button Function in Extended Description Box The detail information on or off. Text Up/Down. Select Timer Record/Remind setting mode. Switch off EPG.

  • Page 138: Button Function In Record/remind Setting Mode

    EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable.

  • Page 139: Button Function In Schedule List Mode

    Button Function in Schedule List Mode If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Currently recording item cannot be edited or deleted. YELLOW Change to Manual Timer mode.

  • Page 140: Picture Size (aspect Ratio) Control

    PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.

  • Page 141

    • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down.

  • Page 142: Picture Wizard

    PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.

  • Page 143: Energy Saving

    ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.

  • Page 144: Preset Picture Settings

    PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games. PICTURE Aspect Ratio : 16:9...

  • Page 145: Manual Picture Adjustment

    MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.

  • Page 146: Picture Improvement Technology

    PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”...

  • Page 147: Expert Picture Control

    EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV.

  • Page 148

    PICTURE CONTROL *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) Skin Colour (-5 to 5) Noise Reduction (Off/Low/Medium/High/ Auto (In Analogue Mode Only) ) Digital Noise Reduction (Low/Medium/High/Off) Gamma (Advanced Control: Low/Medium/High Expert Control: 1.9/2.2/2.4 ) Black Level (Low/High/Auto)

  • Page 149

    Standard : Mode to use original colour area regardless of the display char- • Colour Gamut acteristics. (Advanced Control: Wide: Mode to use maximum colour area of the TV display. • Wide/Standard) ■ Maximize the utilization for colour area that can be expressed. Standard : Mode to use original colour area regardless of the display char- •...

  • Page 150: Picture Reset

    PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE • TruMotion • Screen Select PICTURE. Select Picture Reset. Select Yes. Initialize the adjusted value. Move • Sharpness • Colour • Tint • Colour Temp. •...

  • Page 151: Trumotion

    TRUMOTION (Only 32/42/46/52/60LD5 *** , 32/37/42/47/55LE5 *** ) It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. High : Provide smoother picture movement. Low : Provide smooth picture movement. Use this setting for standard use. Off : Turn off TruMotion Operation.

  • Page 152: Power Indicator

    PICTURE CONTROL POWER INDICATOR Adjust the power/standby indicator light on the front of the TV. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns OPTION Language(Language) ●...

  • Page 153: Mode Setting

    MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores. OPTION Move Language(Language) ● Country : UK ● Disability Assistance ●...

  • Page 154: Demo Mode

    PICTURE CONTROL DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.

  • Page 155: Auto Volume Leveler

    SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.

  • Page 156: Clear Voice Ii

    SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Auto Volume : Off ● Clear Voice II Clear Voice II : Off : Off ● ●...

  • Page 157: Preset Sound Settings-sound Mode

    PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro- priate sound options based on the programme content.

  • Page 158: Sound Setting Adjustment -user Mode, Infinite Sound

    • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. Infinite Sound : Infinite Sound is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers.

  • Page 159: Balance

    BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume : Off ● Clear Voice II : Off ● Balance Balance ● ● Sound Mode : Standard ● • Infinite Sound : Off •...

  • Page 160: Tv Speakers On/ Off Setup

    SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.

  • Page 161: Dtv Audio Setting (in Digital Mode Only)

    DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want. AUDIO Move Sound Mode : Standard ● • Infinite Sound : Off • Treble •...

  • Page 162: Selecting Digital Audio Out

    SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).

  • Page 163: Audio Reset

    AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Sound Mode : Standard ● • Infinite Sound : Off • Treble • Bass • Reset • Reset Digital Audio Out : PCM ● TV Speaker : On ●...

  • Page 164: Audio Description (in Digital Mode Only)

    SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.

  • Page 165: Stereo/dual Reception (in Analogue Mode Only)

    I/II STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. Select Audio or Audio Language. Select the sound output. Broadcast On Screen Display Mono MONO Stereo STEREO...

  • Page 166: Nicam Reception (in Analogue Mode Only), Speaker Sound Output Selection

    SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONLY) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select NICAM MONO or FM MONO.

  • Page 167: On-screen Menu Language / Country Selection

    ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. S elect your desired language. S elect your country. * If you want to change Language/ Country selection Select OPTION.

  • Page 168: Language Selection

    SOUND & LANGUAGE CONTROL LANGUAGE SELECTION The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.

  • Page 169

    < Audio Language Selection > ► When two or more audio languages are broadcast, you can select the audio language. Select Audio or Audio Language . Select an audio language. < Subtitle Language Selection > ► When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITLE button on the remote control.

  • Page 170: Clock Setup

    TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

  • Page 171: Auto On/off Time Setting

    AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time.

  • Page 172: Sleep Timer Setting

    TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. When you switch the TV off, the preset sleep timer is cancelled.

  • Page 173: Set Password & Lock System

    PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ . If a channel is locked, enter the password to unlock it temporarily.

  • Page 174: Block Programme

    PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme. LOCK Set Password ●...

  • Page 175: Parental Control (in Digital Mode Only)

    PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.

  • Page 176: External Input Blocking

    PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in LOCK Set Password ● Lock System : On ● Block Programme ● Parental Guidance : Blocking Off ● Input Block Input Block ●...

  • Page 177: Key Lock

    KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. LOCK Move Set Password...

  • Page 178: Switch On/off, Simple Text

    TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the- minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.

  • Page 179: Top Text, Fastext

    TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block.

  • Page 180: Special Teletext Functions

    TELETEXT SPECIAL TELETEXT FUNCTIONS ■ Press the T. OPT button and then use In UK(In digital mode), T. OPT button does not work. ■ Index Select the each index page. ■ Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen.

  • Page 181: Teletext Within Digital Service, Teletext In Digital Service

    DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.

  • Page 182: Troubleshooting

    APPENDIX TROUBLESHOOTING The TV does not operate properly. The remote control does not work Power is suddenly turned off The video function does not work. No picture & No sound Picture appears slowly after switching on No or poor colour or poor picture Horizontal/vertical bars or picture shaking...

  • Page 183

    The audio function does not work. ■ Press the Picture OK & No ■ Sound muted? Press MUTE button. sound ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one ■...

  • Page 184: Maintenance

    APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke- warm water and a little fabric softener or dish washing detergent.

  • Page 185: Product Specifications

    PRODUCT SPECIFICATIONS MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth)

  • Page 186

    APPENDIX MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 187

    MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 188

    APPENDIX MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 189

    MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 190

    APPENDIX MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 191

    MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 192

    19LE3 *** : DC 24 V, 1.6 A, 38 W AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz 22LE3 *** 22LE3300-ZA / 22LE330N-ZA 22LE3308-ZA 542.9 mm x 407.1 mm x 155.4 mm 542.9 mm x 407.1 mm x 155.4 mm 542.9 mm x 357.6 mm x 34.4 mm...

  • Page 193

    MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement MODELS Dimensions with stand (Width x Height x Depth) without stand...

  • Page 194

    APPENDIX MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 195

    MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption CI Module Size (Width x Height x Depth) Operating...

  • Page 196: Ir Codes

    APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Function Energy Saving POWER INPUT RATIO TV/RAD Q.MENU MENU GUIDE Up ( Down ( Left ( Right ( OK( ) BACK EXIT INFO i AV MODE FAV ( MARK ) MUTE Number Key 0 LIST...

  • Page 197: External Control Device Setup

    EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel.

  • Page 198

    APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. OPTION Language(Language) ● Country ● Disability Assistance ● Power Indicator ● Factory Reset ● Set ID ● Set ID ● Mode Setting ● Select OPTION.

  • Page 199

    Communication Parameters ■ Baud rate : 9600 bps ( UART ) ■ Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code Command Reference List COMMAND COMMAND 01. Power 02.

  • Page 200

    APPENDIX 01. Power (Command: k a) ► To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off [a][ ][Set ID][ ][OK/NG][Data][x] ► To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] [a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘0xFF’...

  • Page 201

    09. Tint (Command: k j) ► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 154. [j][ ][Set ID][ ][OK/NG][Data][x] 10.

  • Page 202

    APPENDIX 17. Energy Saving (Command: j q) ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Power Saving Function 7 6 5 4 0 0 0 0 Low Power 0 0 0 0 0 0 0 0 Low Power 0 0 0 1 0 0 0 0 Low Power 0 0 1 0 0 0 0 0 Low Power 0 0 1 1...

  • Page 203

    21. Key(Command: m c) ► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 148. [c][ ][Set ID][ ][OK/NG][Data][x] 22. Control Back Light (Command: m g) ► To Control the back light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data : data Min: 00 to Max: 64...

  • Page 204: Open Source Software Notice

    MPL LIBRARIES: • Nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.com This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics.

  • Page 205

    ■ copyright © 1993, 1994, 1995, 1996 Rick Sladkey. ■ copyright © 1998-2003 Wichert Akkerman. ■ copyright © 2002-2008 Roland McGrath. ■ copyright © 2003-2008 Dmitry V. Levin. ■ copyright © 2007-2008 Jan Kratochvil. • tinyxml: copyright © 2000-2006 Lee Thomason •...

  • Page 206

    APPENDIX OPEN SOURCE LICENSE Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. The licenses for most software are designed to take away your freedom to share and change it.

  • Page 207

    1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...

  • Page 208

    APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

  • Page 209

    NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

  • Page 210

    APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

  • Page 211

    Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library.

  • Page 212

    APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

  • Page 213

    c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

  • Page 214

    APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob- lems or concerns.

  • Page 215

    MOZILLA PUBLIC LICENSE 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.

  • Page 216

    APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.

  • Page 217

    (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.

  • Page 218

    APPENDIX 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL"...

  • Page 219

    10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R.

  • Page 220

    Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No. : Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)

Comments to this Manuals

Symbols: 0
Latest comments: