Erase
Erase
The
function erases the data from /RW media. The default setting performs
Erase
a
when you press the RUN button.
Quick Erase
You can also press and hold the RUN button for three (3) seconds to perform a
. The
Full Erase
Full Erase
Load
The factory-installed hard disk drive was partitioned and formatted at the factory.
Each partition is approximately 9GB in size.
The
function enables you to transfer data from the DVD-ROM or DVD
Load
Writer drive to the current partition on the hard disk drive.
If you are loading various sources to the hard disk drive, change the
to specify a new partition after the
Name
prevent you from overwriting data that has already been loaded into the previous
partition.
12
requires more time than the
Load
Quick Erase
function is completed. This will
TEAC 1x10 DVD Duplicator User's Manual
.
Partition