Chapter 2. Using The Dvd Duplicator; Setup; Figure 5. Test Function On Lcd Panel - Teac DVW-D110 User Manual

Chapter 2. Using the DVD Duplicator

This chapter explains how to set up the DVD Duplicator, as well as basic
operation and menu functions.

Setup

1. Select a well-ventilated area for the DVD Duplicator. Carefully remove
the DVD Duplicator unit, AC power cord and user's manual CD-ROM
from the shipping box.
Note: Please keep the original box and packaging materials for use in the
event of future storage or transportation of the unit.
2. To ensure that the unit is properly balanced, place the DVD Duplicator
on a flat surface. Extend the Duplicator's feet outward at each its four
lower corners.
For more information, refer to the section "Front Panel" on page 3.
3. Connect one end of the included power cable to the back of the DVD
Duplicator. Connect the other end of the power cable to a three-prong
receptacle AC outlet.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
damage to the unit and electrical shock.
4. Turn on the power to the DVD Duplicator by pressing the power button
on the lower right-hand side of the unit.
During initialization, the DVD Duplicator performs a self-test in which the
unit's internal buffer is tested, source and target drives are detected, and the
LCD display is tested. Once the initialization is complete, the DVD
Duplicator is ready for use.
The LCD initially displays the
TEAC 1x10 DVD Duplicator User's Manual
function by default.
Test

Figure 5. Test Function on LCD Panel

Setup
7