Operating The Unit - Bosch SGE63E06UC - Evolution 24" Special Application Dishwasher FR Operating Instructions Manual

Operating the unit

Turning on the appliance
• Open the door (for hidden controls only).
Turn unit on by pressing the [
•
• The expected cycle duration flashes on the digital display.
Press [ ].
•
START
• Close the door (for hidden controls only). The cycle starts running.
Interrupting the cycle
• Open the door (for hidden controls only).
Press the [
• ON/OFF
warm water connection or that is heated, first leave the door ajar for several minutes and then close. Otherwise,
expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance.
To continue the cycle, press the [
•
• Close the door (for hidden controls only).
Cancelling or changing the cycle
When the display indicates "0:00" it means the cycle has ended. The end of cycle is also indicated by a cycle comple-
tion signal in select models.
• Open the door (for hidden controls only).
Press and hold the "A" button and press [
•
• Close the door (for hidden controls only). The cycle will run for approximately 1 minute.
• The display will indicate "0:00" when the cycle sequence is done.
• Open the door (for hidden controls only) and press the [
• Close the door (for hidden controls only).
Child-proof button *
You can activate this option to prevent accidental changes to the running program by children.
To activate:
• Start the desired cycle.
Hold down the "B" button for approximately 4 seconds until the display indicates "CL".
•
The "CL" will be indicated now if any button is pressed and the program will not be reset.
•
To deactivate:
Hold down the "B" button for approximately 4 seconds until the display no longer indicates "CL".
•
Child-proof lock *
The Child-proof lock is designed to prevent children from opening the dishwasher.
• To lock the door, push the slider below the door grip to the right.
• To unlock the door, push the slider to the left.
17
] button. The LED of the last selected cycle flashes.
ON/OFF
] button. The LEDs go out. The program is saved. If the door was opened on an appliance with
] button again.
ON/OFF
START
] for approximately 3 seconds until "0:01" is displayed .
] button.
ON/OFF