Sony HVR-DR60 - 60GB Hard Disk Recorder Operating Instructions Manual page 18

VCR mode
– Indicators
• The following information can be displayed on the LCD
screen of the HVR-V1U/V1N/V1E/V1P.
23
1
4
5
1 HDD connecting status
This icon is displayed when this unit is connected to the
HVR-V1U/V1N/V1E/V1P.
This icon blinks when an error occurs in this unit.
2 HDD mode
The same icon as the mode icon of this unit is displayed.
HDD mode Mode icon
STANDBY
PLAY
FF
REW
PLAY PAUSE
REC
3 3G sensor status
The following icon is displayed depending on the status
of the 3G sensor of this unit.
When drop detection is not operating: Icon is off.
During drop detection:
When drop detection function is OFF:
4 Time code of the playback signal of this unit
This time code is displayed during playback of a video
recorded by this unit.
5 Data code
This data code is displayed during playback of a video
recorded by this unit.
18
x
N
M
m
u
z
icon blinks.
icon is
displayed.
– Status check indicator
• The following information can be displayed on the status
check indicator (VCR mode) of the HVR-V1U/V1N/V1E/
V1P.
PB FORMAT
Displays the playback format of this unit.
STATUS
Displays the status (recording, playback etc.)
FOLDER
Displays the folder name during playback.
REPEAT MODE
Displays the playback mode. ("1" means "repeat 1 folder,"
"ALL" means "repeat all folders.")
HDD REMAIN
Displays the HDD remaining recording time.
REMAIN
Displays the battery level.
(When this unit is connected to an AC adaptor/charger,
"AC" is displayed.)