Useful Functions In Combination With Hvr- V1U/V1N/V1E/V1P - Sony HVR-DR60 - 60GB Hard Disk Recorder Operating Instructions Manual

Useful functions in combination
with HVR- V1U/V1N/V1E/V1P
Tapeless external REC control
You can start or stop recording video data on this unit by
pressing the REC START/STOP button of the HVR-V1U/
V1N/V1E/V1P without a tape in the HVR-V1U/V1N/V1E/
V1P.
Set the EXT REC CTRL setting of the HVR-V1U/V1N/
V1E/V1P as follows.
• REC CTL MODE ........ SYNCHRONUS or RELAY
• STBY COMMAND ..... Desired setting
* For details, refer to the operating instructions for the
external REC control of the HVR-V1U/V1N/V1E/V1P.
Set this unit as follows
• CAM LINK SEL .......... SYNCHRO
• Press the CAM LINK button to set to CAM LINK [ON].
16
You can record the time code of the HVR-V1U/V1N/V1E/
V1P without a tape in the HVR-V1U/V1N/V1E/V1P.
If you want to record video using the time code of
the HVR- V1U/V1N/V1E/V1P, set the time code
setting of the HVR- V1U/V1N/V1E/V1P as follows.
Time code value always advances.
• TC MAKE ........ PRESET
• TC RUN ........... FREE RUN
Time code value only advances during recording.
• TC MAKE ........ PRESET
• TC RUN ........... REC RUN
In combination with the time code settings of the HVR-V1U/
V1N/V1E/V1P, this unit operates as follows.
Time code of this
unit with a tape in
TC MAKE TC RUN
the HVR-V1U/
V1N/V1E/V1P
When starting
recording on a tape,
video is recorded
using the time code
REGENERATE – of the tape base.
If the time code of
the tape base can not
be read, the time
code starts from
00:00:00:00.
When starting
recording on a tape
or this unit, the time
REC RUN code value advances
from the preset time
code of the HVR-
PRESET V1U/V1N/V1E/
V1P.
The preset time code
value advances
FREE RUN
constantly and data
is recorded using the
data code.
Time code of this
unit without a tape
in the HVR-V1U/
V1N/V1E/V1P
The internal time
code of this unit
runs automatically.
When starting
recording on this
unit, the time code
value advances
from the preset time
code of the HVR-
V1U/V1N/V1E/
V1P.
The preset time
code value
advances constantly
and data is recorded
using the data code.