Auto Power Off; Selecting Video Out Type - Samsung EC-HZ10WBBP User Manual

Settings ( )

Auto power off

This function switches the camera off
after a set amount of time in order to
prevent unnecessary battery drainage.
– Sub menus
[Off]: Do not want to use the Power Off
function.
[1min], [3min]*, [5min], [10min]:
The power will turn off automatically if not used for the period of time
speci¿ ed.
– After replacing the battery, the [Power Off] setting will be preserved.
– Note that the automatic [Power Off] function will not operate if the
camera is in the PC/Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
086

Selecting video out type

The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or
SETTINGS
TV, etc.) to which the camera is connected. PAL mode can support
Format
Off
Reset
only BDGHI.
Recycle Bin 1min
3min
File
„
Imprint 5min
Power Off 10min
Back OK Set
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
Selecting Video
out type
U.S.A, Canada, Japan, South Korea, Taiwan,
NTSC
Mexico.
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
PAL
Malaysia, New Zealand, Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
SETTINGS
Reset
Recycle Bin
File
Imprint
Power Off NTSC
Video Out PAL
OK Set
Back
Description