CAPTURE MODE
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release
button is pressed. Secure the camera to a tripod or place it on a stable surface.
1. Rotate the mode dial to
2. Press the power switch to turn on the power.
3. Press the four-way controller ( /
[Burst]. You can also change the setting using four-way
controller (
).
4. Press the
button to confirm the setting. The
displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of
images.
• In Burst mode, the flash mode will be set to Flash Off automatically.
EN-32
,
,
,
,
, or
) and use ( ) to select
.
indicator is
Capture Mode
Captu
pture Mod
e Mode
Burst
Burst
Bu
OK :
OK :
OK :